ANALOGUE to ANALOGUE CONVERTERS
AAA-3780:
Balanced-Unbalanced / Unbalanced-Balanced Audio Interface Amplifier.
User configurable.
Unbalanced to Balanced, or Balanced to Unbalanced.
High common mode rejection.
Wide gain range.
High packaging density.
ANALOGUE to DIGITAL CONVERTERS
AAC-3390:
Analogue Audio Stereo to AES Converter.
Balanced stereo inputs.
High impedance or 600 Ohm input termination.
AES external reference input.
Balanced 110 Ohm or unbalanced 75 Ohm AES output rear assembly options.
Front panel AES monitoring point.
DVC-4360:
Composite to 270Mb/s SDI Converter.
Configurable for Composite, YPbPr or YC video inputs.
PAL or NTSC operation with auto switching.
2 SDI 270Mb/s outputs.
2 AES or 4 Analogue Audio Inputs.
Group 1 - SMPTE 272M-A synchronous 48 kHz audio insertion.
Video input indicator on front panel.
DIGITAL to ANALOGUE CONVERTERS
DAC-4412:
AES Distribution Amplifier with Analogue Monitoring.
2 balanced AES, 2 unbalanced AES and 2 analogue stereo outputs.
24 bit digital to analogue processing.
75 and 110 Ohm inputs.
Front panel digital monitoring output.
Front panel audio level and AES error indications.
All inputs and outputs transformer coupled.
Digital circuit re-shapes output and restores level.
No cable compensation adjustments required.
Optional plug-in SNMP monitoring module.
DVC-4112:
270 Mb/s SDI to Composite Converter & DA.
Broadcast quality, full 10-bit video conversion.
4 equalised, regenerated and re-clocked repeater outputs.
3 Composite analogue outputs with high quality 10 bit D to A.
Component (RGB, YPbPr) or S-Video (Y/C) output.
PAL or NTSC operation with auto or manual switching.
SDI input loss and decoded video indicators on front panel.
Simple Network Management Protocol (SNMP) capability.
AUDIO INSERTERS (Embedders)
DAI-4206:
3G/HD/SD-SDI Audio Inserter.
Standard 75 Ohm 3G/HD/SD-SDI video input and outputs.
Supports all video line and frame rate standards.
Inserts audio signals into 2 selectable groups.
Eight high quality analogue audio inputs; or
Four 110 Ohm balanced AES inputs.
20 bit and 24 bit audio supported.
Z, C, U data preserved (non re-sampled mode.
Select between AES or Analogue audio inputs.
AES resampling.
Ability to replace existing embedded audio.
Indicators for presence of SDI & audio inputs.
External alarm for loss of carrier.
Selectable SDI generator outputs colour black test signal on loss of SDI input.
Selectable tone generator inserts audio test signals within set audio groups.
Cascadable - Two SDI outputs for connection to additional units.
Simple Network Management Protocol (SNMP) capable.
AUDIO EXTRACTORS (De-Embedders)
DAX-4206:
3G/HD/SD-SDI Audio Extractor.
Standard 75 Ohm 3G/HD/SD-SDI video input and outputs.
Supports all video line and frame rate standards.
Extracts audio signals from 2 selectable groups.
Eight high quality analogue audio outputs.
Four 110 Ohm balanced AES outputs.
Indicators for presence of SDI input type & audio within selected groups.
External alarms for loss of carrier & audio.
Selectable tone generator on audio outputs allow for audio test alignment signals.
Cascadable - Two SDI outputs for connection to additional units.
Simple Network Management Protocol (SNMP) capable.
SIGNAL MONITORING
AAD-4130:
Analogue Audio Stereo Phase & Fail Alarm.
Individual left and right failure outputs.
Stereo out of phase output.
Adjustable threshold on each output.
Adjustable fail and restore times.
Relay isolated outputs.
Front panel indications.
Remote, local or auto reset.
DVG-4090:
SDI / Composite Test Pattern Generator with Crash Switching.
SDI or Composite PAL/NTSC operation.
Choice of 16 Test Patterns on loss of video input.
Choice of 8 banners overlaid or keyed onto SDI input or Test Pattern output.
SWITCHERS
AMS-1000:
10x1 Video + Audio Passive Switcher. (Available Until Sold)
10 input video & audio switching in one unit.
Balanced single channel or unbalanced stereo audio.
Simple passive switching.
Self indicating pushbuttons.
AVS-1210:
10x1 Video Switcher. (Available Until Sold)
10 x 1 or two may be linked for 20 x 1 operation.
Control system allows linking to audio, SDI and data switchers.
Supports multiple remote and local control panels.
User upgradeable from remote to local control.
AVS-3011:
Analogue Video Switcher. (Available Until Sold)
5 x 1 analogue video with looping inputs.
May be cascaded to 20 x 1.
Local or remote control options.
Universal wire per crosspoint or binary coded remote control.
Compatible with other 3000 series analogue & digital switchers.