ANALOGUE AUDIO
AAA-3131:
5 Stereo (10 mono) Analogue Audio Distribution Amplifier.
Selectable stereo or mono mode.
Balanced inputs and outputs.
Front panel monitoring Bantam jacks.
LED audio activity indicators.
Front panel gain adjustments.
Selectable gain ranges: +6 dB, +12 dB & +18 dB.
Maximum output level +24 dBu.
ANALOGUE VIDEO
VA-700:
Analogue Video Distribution Amplifier.
Loop through input.
Ten BNC output's on rear.
>30MHz Bandwidth.
Front panel monitoring output.
Cable equalization to 300m.
Various clamping options.
Longitudinal hum stripping.
Front panel EQ and gain adjustment.
AVA-3900:
Triple Video Distribution Amplifier.
Gain reserve.
DC coupled.
Longitudinal hum reduction.
Cable equalisation.
Three outputs.
Terminating inputs.
Suitable for standard and wideband analogue video signals.
DIGITAL AUDIO
DAA-4400:
AES/EBU Distribution Amplifier.
8 outputs.
75 and 110 Ohm inputs.
Choice of 75 or 110 Ohm outputs by changing rear connector assembly.
Front panel monitoring output.
All inputs and outputs transformer coupled.
Digital circuit re-shapes output and restores level.
No cable compensation adjustments required.
Optional plug-in SNMP monitoring module.
DAC-4412:
AES/EBU DA with Analogue Monitoring.
2 balanced AES, 2 unbalanced AES and 2 analogue stereo outputs.
24 bit digital to analogue processing.
75 and 110 Ohm inputs.
Front panel digital monitoring output.
Front panel audio level and AES error indications.
All inputs and outputs transformer coupled.
Digital circuit re-shapes output and restores level.
No cable compensation adjustments required.
Optional plug-in SNMP monitoring module.
DIGITAL VIDEO
DDA-4010:
Single 1 In, 8 Out / Dual 1 In, 4 Out 3G/HD/SD/ASI
Reclocking/Non-Reclocking Distribution Amplifier.
Switch selectable for single 1 in, 8 out or dual 1 in, 4 out distribution amplifier
operation.
In-phase reclocked / non reclocked outputs on each amplifier.
Selectable for either 3G/HD/SD-SDI or ASI applications.
Automatic output muting on no input.
Front panel monitoring outputs.
Front panel indicators provide monitoring of presence of inputs and lock status.
Automatic changeover to second input on loss of primary input (selectable).
Optional relay bypass on loss of power.
SNMP monitoring and control.
DDA-4320:
ASI / SDI / STM-1 Path Protection & Distribution Amplifier.
For use as buffer or distribution amplifier.
4 x in-phase reclocked outputs.
Protection switching capability.
Selectable for either ASI / SDI or STM-1 applications.
Automatic input equalisation to 250m.
Automatic output muting on no input.
Relay bypass on loss of power.
Front panel indicators provide monitoring of presence of input signal at
270 Mb/s (ASI/SDI) or 155 Mb/s (STM-1).
SNMP monitoring and control.
ZDA-4320RH:
Handshake Connection ASI / SDI / STM-1 Data Amplifiers.
Redundant pair protection switching operation.
External alarms from each module.
One output bypass on power loss.
DVC-4112:
270 Mb/s SDI to Composite Converter & DA.
Broadcast quality, full 10-bit video conversion.
4 equalised, regenerated and re-clocked repeater outputs.
3 Composite analogue outputs with high quality 10 bit D to A.
Component (RGB, YPbPr) or S-Video (Y/C) output.
PAL or NTSC operation with auto or manual switching.
SDI input loss and decoded video indicators on front panel.
Simple Network Management Protocol (SNMP) capability.
G.703
DDA-4280:
2.048 Mbps (E1) G.703 Data Distribution Amplifier.
Data regeneration with Jitter Attenuator.
Front panel monitoring facility.
Protection switching facility.
External alarms and bypass.
Redundant pair operation capability.
Simple Network Management Protocol (SNMP) monitoring.
DDA-4301:
E3/DS3 G.703 Data Distribution Amplifier.
G.703 compliant.
For either E3 or DS3 G.703 data rates.
Adaptive cable input equalisation.
Data regeneration.
Front panel monitoring facility.
Protection switching facility.
External alarms and bypass.
Redundant pair operation capability.
Optional SNMP capability.
ZDA-4300RH:
Handshake Connection E1, E3 & DS3 Data Amplifiers.
Redundant pair operation.
Protection switching facility.
External alarms from each module.
One output bypass on power loss.
PASSIVE SPLITTERS
DDF-3101:
Dual Passive Splitter.
Dual 2 way RF splitters.
Operates in the frequency range of 0.25 MHz to 300 MHz.
Suitable for 34/45/270 Mb/s data rates.
No power required - totally passive.
Connections made by BNC connectors.
OFX-4042:
2 Way Optical Splitter.
50/50 optical splitter.
Operates in the full CWDM wavelength range.
Suitable for all signal types.
No power required - totally passive.
Connections made by SC/PC connectors.
OFX-4044:
4 Way Fibre Optic Splitter.
25/25/25/25 optical splitter.
Operates in the full CWDM wavelength range.
Suitable for all signal types.
No power required - totally passive.
Connections made by SC/PC connectors.
OFX-4048:
8 Way Fibre optic Splitter.
8 way equal optical splitter.
Operates in the full CWDM wavelength range.
Suitable for all signal types.
No power required - totally passive.
Connections made by SC/PC connectors.