openGear

The openGear^® standard allows a mix and match approach of various manufacturer's equipment that conform to the standard to be mounted within a single common frame saving on rack space where only a few cards are required from multiple vendors.

IRT openGear^® cards fully meet the openGear^® standard. Software based remote monitoring and control via a computer is possible via the free downloadable, 3rd party, DashBoard™ application available from Ross Video's website.

SNMP control via a third party SNMP Browser is also possible provided openGear^® frame is fitted with SNMP enablednetwork controller card. Requires openGear^® MIB Files to match frame and cards, downloadable here.

Both openGear^® and DashBoard™ are registered Trade Marks of Ross Video Ltd.

DISTRIBUTION AMPLIFIERS


IRT-6010-DDA: Single 1 In, 8 Out / Dual 1 In, 4 Out 3G/HD/SD/ASI Reclocking/Non-Reclocking Distribution Amplifier. Switch selectable for single 1 in, 8 out or dual 1 in, 4 out distribution amplifier operation. In-phase reclocked / non reclocked outputs on each amplifier. Selectable for either 3G/HD/SD-SDI or ASI applications. Automatic output muting on no input. Front edge indicators provide monitoring of presence of inputs and lock status. Automatic changeover to second input on loss of primary input (selectable). Optional relay bypass on loss of power. DashBoard™ software monitoring and control.	Brochure	User Manual

IRT-6100-DDF: Triple Passive Splitter. Triple 2 way RF splitters. Operates in the frequency range of 0.25 MHz to 300 MHz. Suitable for 34/45/270 Mb/s data rates. No power required - totally passive. Connections made by BNC connectors. For mounting within an openGear^® frame.	Brochure	User Manual

IRT-6400-DAA: AES/EBU Distribution Amplifier. Dual 1x4 or 1x8 outputs. 75 and 110 Ohm inputs. Choice of 75 or 110 Ohm outputs by changing rear connector assembly. All inputs and outputs transformer coupled. Digital circuit re-shapes output and restores level. Selectable resampling to alternate input or local reference. No cable compensation adjustments required. DashBoard™ software monitoring and control.	Brochure	User Manual

FIBRE OPTIC


IRT-6630-DTR: 3G/HD/SD-SDI/ASI Fibre Optic Transceiver. Transports 3G-SDI, HD-SDI, SD-SDI or ASI signal rates. Single or bi-directional operation possible with independent transmit and receive functions on the one card. Path lengths up to 30 dB optical path loss using 9/125µm single mode fibre. Automatic changeover switching of input for signal redundancy on Tx. Optional on-board WDM optical combiner for use on a single common fibre. DashBoard™ and SNMP software monitoring and control.	Brochure	User Manual

IRT-6630-DDT & IRT-6630-DDR: 3G/HD/SD-SDI/ASI Fibre Optic Link. Transports 3G-SDI, HD-SDI, SD-SDI or ASI signal rates. Path lengths up to 30 dB optical path loss using 9/125µm single mode fibre. Automatic changeover switching of input for signal redundancy on Tx. DashBoard™ and SNMP software monitoring and control.	Brochure	User Manual

IRT-6632-DDT & IRT-6632-DDR: Dual 3G/HD/SD-SDI/ASI Fibre Optic Link. 2 independent fibre links. Transports 3G-SDI, HD-SDI, SD-SDI or ASI signal rates. Transmitter (Tx) and receiver (Rx) can be used separately with 2 independent single channel fibre Rx and Tx cards. Path lengths up to 30 dB optical path loss using 9/125µm single mode fibre. Optional on-board WDM optical combiner for use on a single common fibre. DashBoard™ and SNMP software monitoring and control.	Brochure	User Manual

IRT-6638-DDT & IRT-6638-DDR: 8-Channel 3G/HD/SD-SDI/ASI Fibre Optic Link. Transports up to 8 independent 3G-SDI, HD-SDI, SD-SDI or ASI signal rates on a single fibre via an on-board CWDM optical combiner. Path lengths up to 27 dB optical path loss using 9/125µm single mode fibre. Transmitter (Tx) and receiver (Rx) can be used separately with 8 independent single channel fibre Rx and Tx cards via an external CWDM optical combiner. DashBoard™ and SNMP software monitoring and control.	Brochure	User Manual

IRT-6690-DDT & IRT-6690-DDR: 8 Channel SD-SDI/ASI Fibre Optic Link. 270 Mb/s type signals, such as ASI and SDI, capability. Automatic cable equalisation for up to 300m on each input. Optical path loss ≥ 27dB. DashBoard™ and SNMP software monitoring and control.	Brochure	User Manual

IRT-6580-EOT: Ethernet to Optical Fibre Transceiver. Suitable for 10/100/1000 Base-T Ethernet. Standard RJ-45 CAT-5 Ethernet connection. Supports Jumbo frames. 1000 Base-X optical interface. Path lengths up to 30dB optical path loss using 9/125µm single mode fibre. Optional on-board WDM optical combiner for use on a single common fibre. DashBoard™ and SNMP software monitoring.	Brochure

IRT-6590-EOT: 3G/HD/SD-SDI/ASI + Ethernet to Optical Fibre Transceiver. Bi-directional combined digital video and Ethernet on a single fibre. Suitable for 3G-SDI, HD-SDI, SD-SDI or ASI signal rates and 10/100/1000 Base-T Ethernet. Standard RJ-45 CAT-5 Ethernet connection. Supports Jumbo frames. Path lengths up to 27dB optical path loss using 9/125µm single mode fibre. DashBoard™ and SNMP software monitoring.	Brochure

NETWORK INTERFACE ADAPTERS


IRT-6000-TPD: 8 Input / 8 Output Relay Network Interface. Eight alarm input ports. Eight solid state relay control output ports. DashBoard™ software monitoring and control.	Brochure

IRT-6750-MEM: ASI / TSoIP (Ethernet) Network Interface Adapter. ASI to TSoIP, or TSoIP to ASI conversion. Set up as either a Transmitter or Receiver. Supports enabling of Forward Error Correction (FEC). IP de-jittering. UDP or RTP encapsulation. DIP switch, DashBoard™ and SNMP software monitoring and control.	Brochure	User Manual

SWITCHERS


IRT-6080-DVS: 3G/HD/SD-SDI / ASI Digital Video Switcher & Router. 3G-SDI, HD-SDI, SD-SDI or ASI capable. 8x1 or dual 4x1 switching operation. 8x2 or 4x2 router setup. Automatic muting on loss of inputs. Front edge local control with remote control option. DashBoard™ software monitoring and control.	Brochure	User Manual

IRT-6170-AMS: 3G/HD/SD-SDI, ASI, G.703, Video, Audio Relay Changeover Switch. One video and two audio changeover switches in one package. Video path suitable for 3G/HD/SD-SDI, Analogue Video, ASI, G.703 signals @ 2, 8, 34, 45, 144, 155 Mb/s, and unbalanced AES. Audio path suitable for 2 balanced, or 4 unbalanced, audio or data signals, and balanced AES. Married or independent operation. Momentary Set/Reset control. No path change on power fail. Local or remote control. DashBoard™ software monitoring and control.	Brochure	User Manual

IRT-6170-AAS: Dual 4x1 / Single 7x1 Analogue Stereo / Digital Audio Relay Switcher. Dual 4 x 1 or single 7 x 1 relay switch. Stereo or Balanced Inputs & Outputs. Latching relays. Optional Remote Control. DashBoard™ software monitoring and control.	Brochure	User Manual

IRT-6170-AVS: Dual 4x1 / Single 7x1 75Ω Relay Switcher. Dual 4 x 1 or single 7 x 1 relay switch. 75 ohm unbalanced Inputs & Outputs. Latching relays. Optional Remote Control. DashBoard™ software monitoring and control.	Brochure	User Manual

TEST PATTERN GENERATORS

IRT-6900-DVG: 3G/HD/SD-SDI & Composite/Component Test Pattern Generator
with Audio Tone Generator.

3G/HD/SD-SDI test patterns with embedded audio.
Composite CVBS, Luma, Chroma, RGB, YUV, YPrPb (SD only).
AES audio test tones.
Analogue audio test tones.
Composite reference input.

Brochure

User Manual